What is Plug Valve?- Working, Types, and Application

What is Plug Valve?

A plug valve is a valve with cylindrical or conically tapered “plugs” which can be rotated inside the valve body to control flow through the valve.

The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves are simple and often economical.

When the plug is conically tapered, the stem/handle is typically attached to the larger diameter end of the plug.

Plug valves usually do not have bonnets but often have the end of the plug with the handle exposed or mostly exposed to the outside.

In such cases, there is usually not much of a stem. The stem and handle often come in one piece, often a simple, approximately L-shaped handle attached to the end of the plug.

The other end of the plug is often exposed to the outside of the valve too, but with a mechanism that retains the plug in the body.

The simplest and most common general type of plug valve is a 2-port valve with two positions: open to allow flow, and shut (closed) to stop the flow. Ports are openings in the valve body through which fluid can enter or leave.

The plug-in of this kind of valve has one passageway going through it. The ports are typically at opposite ends of the body; therefore, the plug is rotated a fourth of a full turn to change from open to shut positions.

This makes this kind of plug valve a quarter-turn valve. There is often a mechanism limiting the motion of the handle to a quarter turn, but not in glass stopcocks.

What is Plug Valve?

How Does a Plug Valve Work?

A plug valve is based on a plug with a hollow passage in the valve body. The quarter-turn motion creates an alignment between the pipe and the hole, leading to an open state.

When turned to a 90-degree angle from the open position, the valve sits across the pipe leading to a closed state.

Plug valves are available in a variety of different styles and port openings through the plug.

  • Two-Way Plug Valves: The design allows for a closure element in the middle (a plug and a sleeve), along with a straight through, two-way service for the open and close function.
  • Three-Way Plug Valves: These valves include a third port, which typically sits at a right angle from the inlet. These plug valves can help in diverting flow (entry from inlet directed between one or both outlets) or combining flow (entry from the two inlets channeled into a single outlet).

What is a Plug Valve Used for?

Plug valves are an excellent option for many commercial and light industrial applications, including directional flow control, handling of gas or liquid fuels, regulating fluids with suspended solids, such as slurries, or handling low-pressure, low-temperature services.

Due to their smooth design, inline maintenance capabilities, leak-tight service, minimal resistance to flow, and multi-port design options, plug valves find application across a multitude of sectors and systems.

Types of Plug Valves

Plug valves are available in various types as given below:

  • Lubricating Plug Valve
  • Non-Lubricating Plug Valve
  • Multi-Port Plug Valves
  • Eccentric Plug Valve
  • Expanding Plug Valve

1. Lubricated Plug Valve

 As the name suggests, a lubricated valve uses a lubricant usually made up of a base oil and viscosity improver (like amorphous or fumed silica) that is injected under pressure between the plug face and body seat to reduce friction and seal ports.

Valve manufacturers generally recommend lubricant suitable for the process fluid, and the valves often must be resealed after only a few cycles, and in some cases, after every cycle.

Considered a high maintenance plug valve, they are often used in applications that have infrequent operations.

Lubricated plug valves perform well in processes that utilize fluids that carry mildly abrasive particles such as dirty upstream applications, gas pipeline systems that need bypass valves, and blow-down valves on valve stations and kicker valves.

2. Non-Lubricated Plug Valve

This plug valve utilizes a tapered or cone shape that acts as a wedge and presses a polymeric sleeve against the body cavity. The use of the sleeve reduces friction between the plug mechanism and the body. 

Non-lubricated plug valves are often used instead of lubricated ones in applications where maintenance needs to be kept to a minimum, such as special services in Sulphur, hydrogen fluoride, or where liquids could be trapped or solidify and potentially jam the valve.

However, non-lubricated plug valves are limited by the temperature and chemical compatibility of the non-metallic materials they are made of.

The three main types of non-lubricated plug valves are:

  • Lift-type plug valve
  • Elastomer sleeved plug valve
  • Fully lined plug valve

3. Multi-Port Plug Valves

Here you can see the 3-way multiport plug valve. The top image is of 3-way 3-port design and the bottom is a 3-way 2-port design.

Multiport valves are used in transfer lines and for diverting services. A single multiport valve may serve the purpose of three or four gate valves or other types of shutoff valves.

However, sometimes the multiport valve does not completely shut off flow. Great care should be taken in specifying the particular port arrangement for proper operation.

4. Eccentric Plug Valve

The design of this plug valve uses a half plug that is advantageous for applications needing a higher seating force with minimal friction from the open to the closed position. The torque seated valves also feature improved shut-off capabilities.

Eccentric plug valves are used for a wide range of flow control and isolation applications including clean and dirty water, sewage, sludge and slurries, air, and other services.

5. Expanding Plug Valve

This complex plug valve uses multiple components that allow the valve to mechanically expand and give it a true double block and bleed function in one valve.

The plug valve uses a mechanism that rotates between the open and closed positions and protects both seals from the flow path.

During rotation, there is no contact between the body and seals, and slips expand onto the body seat when the valve is closed to avoid causing any wear or abrasion to the seals.

They are often used to prevent product contamination in applications that do not require double isolation.

Plug Valve Disk Types

Plugs are either round or taper cylinders. They may have various types of port openings, each with a varying degree of the opening area.

  • Rectangular Port is the most common for a plug valve. The rectangular port represents at least 70% of the corresponding pipe’s cross-sectional area.
  • Round port plug has a round opening through the plug. It is available in full bore and reduced bore design. Valves with reduced ports are used only where restriction of flow is not important.
  • Diamond Port plug has a diamond-shaped port through the plug. All diamond port valves are venturi restricted flow type. This design is for throttling service.

Plug Valve Applications

  • Plug valves are commonly used in low-pressure-low-temperature services, although some high-pressure-high-temperature designs also exists.
  • Plug valves are high-capacity valves that can be used for directional flow control, even in moderate vacuum systems.
  • Plug valves can efficiently handle gas and liquid fuel.
  • Plug valves can safely handle extreme temperature flow, such as boiler feed water, condensate, and other such elements.
  • Plug valves can be used to regulate the flow of liquids containing suspended solids, for example, slurries.

Advantages and Disadvantages of Plug Valve

Advantages:

  • Plug valves have simple design with few parts.
  • Plug valves open and close easily (except large dimensions).
  • Maintenance and repair of plug valves can be done at the place of operation.
  • Plug valves have low flow resistance.
  • Plug valves provide reliable leak-proofness.

Disadvantages:

  • Because of high friction, first movement (opening-closing) requires a large amount of force.
  • NPS 4 (DN100) and larger plug valves require a gearbox or an actuator.
  • Plug valve transitions are narrowing flows due to conic plug.
  • Generally, plug valves costs are much larger than ball valves.

FAQs

What is the plug valve used for?

Usually available in cylindrical or conical shapes, plug valves are quarter-turn manual motion valves used for stopping or starting the flow of fluid. They offer on-off, diverting, as well as basic moderate throttling services.

Why use a plug valve instead of a ball valve?

Although both valves need regular maintenance to stay working efficiently, a plug valve is much easier to maintain than a ball valve. The plug can be removed easily for cleaning and repairs. There are also fewer moving parts that would also need attention.

What is the purpose of the valve plug in a control valve?

Plug valves utilize conical and cylindrical plugs to stop or throttle flow in a system. The plug has an opening in the center that allows for flow through the valve in the open position when the cavity is parallel to the flow.

Is a plug valve a shut off valve?

These valves are quarter-turn style valves, like butterfly valves, Plug Valves are designed to be a cost-effective solution for pump control, shut-off and throttling operation.

How to tell if a plug valve is open or closed?

Find the Valve Handle: Look for the handle that resembles a wheel; when the valve is open, it is usually parallel to the pipeline. Swivel the Handle: Turn the handle counterclockwise to close the valve. The disc or plug descends and impedes the passage of fluid.

What is the difference between a plug valve and a gate valve?

Gate valves use a wedge-shaped disc to control fluid flow, while plug valves use a cylindrical or tapered plug to regulate fluid flow. The second difference is in their flow control capabilities.